NAC-1 & NAC-2 Power Cable - 2m

Auto-Stby Button - Metal. For a physical Auto/Stby button in systems with NAC-1 and NAC-2 Autopilot Computers.

SUNCOVER,AP44 DISPLAY

Suncover for A2004/AP48 autopilot controllers

Suncover / protective cover for AP70mk2. Also fits AP80, MX610 and MX612.

SD80 Solenoid Drive PCB for on/off or proportional control of rudder or thruster using galvanic isolated solenoids or high level current. To be mounted in AC85 Autopilot Computer Cabinet.

AD80 Analog Drive PCB for rudder/thruster, to be mounted in AC85 Autopilot Computer cabinet.

SI80 Signal Interface PCB with 4 NMEA 0183 RX/TX ports, built-in 12V N2K Network supply. Power input 12-24V DC.

AC70 spare PCB assembly. Also option for Voith Schneider propeller control. To be mounted in AC85 Autopilot Computer Cabinet for IMO approved Voith Schneider pilot.

AC70, AC12 and AC42 Terminal Cover

NAC-2 Spare Drive Cable - 2m (6.5 ft)

NAC-2 Rudder feedback cable: Used to connect resistive rudder feedback units to either NAC-1 or NAC-2. 3 Pin connector to 3 bare wires. 2 m (6.5 ft)

HS70 Programming Cable

HS70 NMEA0183 & Power Cable - 15m

AP70MK2 Bracket Mount Kit. Also for AP70/AP80/MX610/MX612/GN70.

AP24/AP28/IS20 Optional Mounting Bracket

SPARES KIT FOR T1/T2 BLACK RAMS

WR10 BT-1 Base Station Only

WR10 Wireless Remote for Autopilot.

RPU80/100/150/160/200 Seal Kit. Works for all motor types and pump sizes.

RPU80 Motor Brushes - Framco

RPU Motor Brushes - Framco for RPU300

RPU Motor Brushes - Lemac for RPU80/160

RPU Motor Brushes - Lemac (Long) for RPU300