Shaft seal: 1x Seal, shaft

Slip gear assembly: 1x Gear assembly, 2x Screw, M3 x 20, torx

Steering motor thermocouple kit: 1x Cable assembly thermistor 150 mm, 1x Thermocouple adhesive, 1x PCBA thermal pad

Thermal pad, PCBA: 1x PCBA thermal pad

Thermal pad, steering motor: 1x Motor thermal pad

Tensioning bolt kit: 1x Screw, M5x20 mm, hex, socket, SS316, 1x Seal, adjusting screw, O-ring

Steering motor kit: 1x Motor assembly, 1x Motor thermal pad, 1x PCBA thermal pad, 1x Screw, M5x20 mm, hex, socket, SS316, 1x Seal, adjusting screw, O-ring, 4x Screw, M3 x 10, torx, 1x Motor belt

Head sensor assy: 1x Sensor assembly, 2x Screw, M3 x 10, torx

1x Idler, gear, pully, assembly

1x Indicator pulley assembly

1x Indicator belt

1x Motor belt

12x Screw, M3 x 20, torx

Gear cover kit: 1x Cover, gear drive, 8x Screw, M3 x 18, hex, 1x Cable tie/heat shrink kit.

Thermal spreader kit, 1x Spreader, thermal, 1x Thermal pad, 3x Screw, M3 x 10, torx

GPS PCBA 1x PCB Test Assembely: 2x Screw, torx, no. 6 x 3/8, 1x GPS PCBA cable (not shown in the illustration)

Case seal 1x Seal, case

Lowrance label 1x Head decal

Top housing assembly 1x Housing, upper assembly (including head decal and indicator decal ring), 14x Screw, torx, no. 6 x 3/4

Housing hardware 14x Screw, torx, no. 6 x 3/4

Indicator assembly 1x Indicator w/magnet, 1x Indicator ring

1x Cable, head to pedal, GHOST 47", 2x Screw, M3 x 10, torx, 1x Seal, strain relief, 1x Cable tie/heat shrink kit, 1x PCBA thermal pad

Lower bezel kit: 1x Bezel, lower, 2x Screw, M3 x 10, torx

Lower unit hardware kit: 1x Seal washer, 5x9x1, 1x Screw, M5x8, 4x Screw, M3, 5x10, 1x Bearing-shim washer, 1x O-ring, 85x3 mm, 1x O-ring, 80x3 mm