1x Indicator pulley assembly

1x Indicator belt

1x Motor belt

12x Screw, M3 x 20, torx

Gear cover kit: 1x Cover, gear drive, 8x Screw, M3 x 18, hex, 1x Cable tie/heat shrink kit.

Thermal spreader kit, 1x Spreader, thermal, 1x Thermal pad, 3x Screw, M3 x 10, torx

GPS PCBA 1x PCB Test Assembely: 2x Screw, torx, no. 6 x 3/8, 1x GPS PCBA cable (not shown in the illustration)

Case seal 1x Seal, case

Lowrance label 1x Head decal

Top housing assembly 1x Housing, upper assembly (including head decal and indicator decal ring), 14x Screw, torx, no. 6 x 3/4

Housing hardware 14x Screw, torx, no. 6 x 3/4

Indicator assembly 1x Indicator w/magnet, 1x Indicator ring

1x Cable, head to pedal, GHOST 47", 2x Screw, M3 x 10, torx, 1x Seal, strain relief, 1x Cable tie/heat shrink kit, 1x PCBA thermal pad

Lower bezel kit: 1x Bezel, lower, 2x Screw, M3 x 10, torx

Lower unit hardware kit: 1x Seal washer, 5x9x1, 1x Screw, M5x8, 4x Screw, M3, 5x10, 1x Bearing-shim washer, 1x O-ring, 85x3 mm, 1x O-ring, 80x3 mm

OUTER SHAFT

Lower bearing clamp kit: 2x Collar, lower, 2x Screw, M5x20 mm, hex

Bearing, sealed kit: 2x Bearing sealed, 2x Bearing wedge, 1x Seal, shaft, 1x Cable tie/heat shrink kit

Nose cone O-ring kit: 1x O-ring, 41x2.62mm, 1x O-ring, 15x3.53mm, 2x O-ring, 84x4.10mm

2x Nose cone O-ring, 1x Cable tie/heat shrink kit (not shown in the illustration), 1x Column, inner, GHOST 47"/lower unit (pre-assembled)

1x Column, inner shaft, 47"

Propeller hardware kit: 1x Thrust washer, 1x Propeller pin 1x M10 Propeller washer 1x M10 Nylock nut

Propeller kit: 1x Thrust washer, 1x Propeller pin, 1x M10 Propeller washer, 1x M10 Nylock nut, 1 x Propeller

360 Head HW kit: 2x Screw, SHCS M8 x 1.25 x 20