Speed knob kit: 1x Speed knob, pedal: 1x Spring, Compression, speed knob, 1x E-clip 3/4”, 1x D-clip, 1/4” shaft

Bluetooth module kit: 4x Screw 7mm torx T8, 1x Screw, no. 6x3/8, Phillips, pan, SS, 2x Cable tie, anchored, 1x Bluetooth seal, pedal, 1x Bluetooth cover, pedal, 1x Bluetooth cable grommet, pedal, 1x PCB TST assembly Bluetooth

Momentary switch kit: 1x Momentary switch, pedal, 2x Screw, M3x18mm, hex, button, 304SS, 1x Screw, no. 6x3/8, Phillips, pan, SS, 2x Cable tie, anchored, 2x Nylock SS nut M3, 1x Momentary button, pedal, 1x Spring, compression, 7mm ID x 15mm x 1m, 1x Moment

GHOST foot pedal Configurable button 3.1 x Back right button assembly, pedal, 1x Spring, compression, 7mm ID x 15mm x 1m.

GHOST foot pedal Configurable button 2 kit. 1 x Back left button assembly, pedal, 1x Spring, compression, 7mm ID x 15mm x 1m.

Housing, lower, pedal kit, 47”: 1x Base, pedal, 1x Wiper seal, pedal, 3x Grommet wires pedal, 1x Cable tie/heat shrink kit (not shown in the illustration), 1x Misc. hardware, pedal kit

Damper gear assembly kit: 1x Damper gear assembly, 1x Screw, cap, M4x16, 1x Screw, no. 6x3/4, torx, pan, ss

Damper kit: 1x Damper, pedal, 1xScrew M4X8 socket cap head S/S 304, 1x Washer M4 flat OD 12mm SST, 1x PSA washer damper

Label, battery: 1x Label status panel w/adhesive, pedal

PCBA, battery kit, 1x PCB TST ASY power/battery potted, 1x Cable tie/heat shrink kit, 3x Screw 7 mm torx T8

Bottom plate, pedal kit: 1x Bottom plate, pedal, 2x Screw, M5x10 mm, hex, button, SS316, 8x Screw, no. 6x3/4, torx, pan, SS, 4x Rubber foot pedal

Pedal PCBA, potted assembly kit: 1x Potted main controller assembly, pedal, 1x Cable tie/heat shrink kit, 6x Screw M2.5 x 10 T8 PT THR

MISC. HARDWARE,MOUNT KIT

Lower extrusion kit, GHOST 47": 1x Lower extrusion, with bushing, GHOST 47"

Lower extrusion hardware kit: 2x Bolt, rear hinge, 4x Bushing, 1/2”, 2x Washer, M10, 316SS, 2x Jam nut, M10

Pushrod pin kit: 1x Pushrod pin 2x Pushrod pin clip

Latch trigger kit, GHOST 47": 2x Latch trigger, GHOST 47"

Front latch guide kit: 1x Guide, front latch, 1x Spring, extension, front latch

Front latch block: 1x Front latch block

Lower head adapter pin kit: 1x Pin bracket/bow arm, 1x Set screw, M6 x 8, SS

Secondary latch kit: 1x Secondary latch, 1x Spring, secondary latch torsion, 2x Washer, 1/2", nylon, 1x C-ring, 1/2", 15-7 PH SS, 1x Pull cable spacer

Upper extrusion kit with bushing, GHOST 47": 1x Upper extrusion assembly, GHOST 47"

Upper head adapter pin kit: 1x Pin, upper head, 2x E-clip, 1/2", 15-7 PH SS

Head adapter kit: 1x Head adapter with bushing