1x Motor belt

12x Screw, M3 x 20, torx

Gear cover kit: 1x Cover, gear drive, 8x Screw, M3 x 18, hex, 1x Cable tie/heat shrink kit.

Thermal spreader kit, 1x Spreader, thermal, 1x Thermal pad, 3x Screw, M3 x 10, torx

GPS PCBA 1x PCB Test Assembely: 2x Screw, torx, no. 6 x 3/8, 1x GPS PCBA cable (not shown in the illustration)

Case seal 1x Seal, case

Lowrance label 1x Head decal

Housing hardware 14x Screw, torx, no. 6 x 3/4

1x Cable, head to pedal, GHOST 47", 2x Screw, M3 x 10, torx, 1x Seal, strain relief, 1x Cable tie/heat shrink kit, 1x PCBA thermal pad

Lower unit hardware kit: 1x Seal washer, 5x9x1, 1x Screw, M5x8, 4x Screw, M3, 5x10, 1x Bearing-shim washer, 1x O-ring, 85x3 mm, 1x O-ring, 80x3 mm

Lower bearing clamp kit: 2x Collar, lower, 2x Screw, M5x20 mm, hex

Nose cone O-ring kit: 1x O-ring, 41x2.62mm, 1x O-ring, 15x3.53mm, 2x O-ring, 84x4.10mm

2x Nose cone O-ring, 1x Cable tie/heat shrink kit (not shown in the illustration), 1x Column, inner, GHOST 47"/lower unit (pre-assembled)

1x Column, inner shaft, 47"

Propeller hardware kit: 1x Thrust washer, 1x Propeller pin 1x M10 Propeller washer 1x M10 Nylock nut

Propeller kit: 1x Thrust washer, 1x Propeller pin, 1x M10 Propeller washer, 1x M10 Nylock nut, 1 x Propeller

360 Head HW kit: 2x Screw, SHCS M8 x 1.25 x 20

NSX 3012 - Smart Chartplotter / fishfinder. No Transducer. No Chart. 12-inch SolarMAX™ high definition display, Built-in 1 kW echosounder, GPS, and WIFI. A next-generation C-MAP® DISCOVER™ X or REVEAL X™ chart card is required.

NSX 3009 - Smart Chartplotter / fishfinder. No Transducer. No Chart. 9-inch SolarMAX™ high definition display, Built-in 1 kW echosounder, GPS, and WIFI. A next-generation C-MAP® DISCOVER™ X or REVEAL X™ chart card is required.

NSX 3007 - Smart Chartplotter / fishfinder. No Transducer. No Chart. 7-inch SolarMAX™ high definition display, Built-in 1 kW echosounder, GPS, and WIFI. A next-generation C-MAP® DISCOVER™ X or REVEAL X™ chart card is required.

Wind vane assembly spare for WS300/700 series wind sensors. Inc. mounting nut.

Replacement wind angle bearing for the WS300/700 series wind sensors.

Replacement battery for WS320 wireless wind sensor.

Wind Speed Cup spare for all B&G MHUs (508, 608, 213, VMHU, WS300, WS700)